• Solutions

Solutions

Here at NCM Systems we offer specific manufacturing solutions, we specialize in measurement and control systems. For weight and thickness measurements. Listed below are just a few examples of the applications our products have and which system or systems we would offer to give you the best result.

  • Film Extrusion

  • Plastic Extrusion

  • Rubber Extrusion

  • Paper Calendar

  • Rubber Calendar

  • Poly And Glass

Film & Plastic Extrusion

For Film and Plastic Extrusion we would suggest our "NCM Air Caliper System", because it uses air pressure to measure there is no risk of it contaminating or disturbing the product. Also if the Plastic or Film is clear we would recommend our "Camera Inspection System" to constantly check your production run for defects to make sure it is of the highest quality.

 

Rubber Extrusion

For Rubber Extrusion we would suggest one of our high reliability beta scanners, because of it long factory life and minimal maintenance and with its ability to provide sub micron measurements with a 99.9% effectiveness rating. Any maintenance work or radiation support can be carried out on our behalf so we are able to offer very competitive quotes.

 

Rubber Calendar

On a Rubber Calendar line a "Air Gauging System" may not be appropriate due to manufacturing conditions so we would suggest a multi scanner Arrangement comprised of one "High Reliability Beta Scanner" and two " Backscatter Scanners". We would position the two back scatters in on the calendar to provide application measurements and the Beta Scanner slightly further down the line to give an overall measurement, with these systems in place you are able to have a more precise measurement down to sub micro perfect.

 

Paper Calendar

For Paper Extrusion we would suggest one of our high reliability beta scanners, because of it long factory life and minimal maintenance and with its ability to provide sub micron measurements with a 99.9% effectiveness rating. Any maintenance work or radiation support can be carried out on our behalf so we are able to offer very competitive quotes.

 

Poly And Glass

For Poly and Glass measurements we would suggest using a beta for "Poly" and an X-ray for the "Glass", As the glass is more attenuating of the X-ray than the Beta. A bespoke measurement algorithm solves the simultaneous equation in real time and produces an accrete measurement for poly and glass.

 

 

 

 

Beta Measurement System